|
General Features
The Trip-Edge configuration is the most effective design…
Allows user to plow and stack more snow
Blade stays upright, snow stays put unlike full trip blades that lay down
Plow as much snow as the truck can handle, not slowed down by blade limitations
Utilizes compression springs that last longer than extension springs which require frequent adjustments.
STORM GUARD™ powder coating process…
- Applied to all FISHER® snowplows, provides industry-best protection against wear and rust.
- Pre-Treatment Includes:
- 8 WHEEL SHOT-BLASTER to remove mill scale and profile steel surfaces for optimum adhesion
- MULTI, 8 - STAGE WASH is entirely automated for consistency and provides a superior surface preparation for enhanced corrosion resistance
- Automated climate controlled powder booths provide uniform coverage to all surfaces.
Intensefire™ Lighting…
- Reflector optics designed to provide operator smooth, wide beam pattern with minimal glare above lamp during snowfall
- Tough, hard-coated plastic lens provides excellent impact resistance in coldest of temperatures
- 10,000 hour, 4157NAK, long-life Park/Turn/DRL bulb utilizes Krypton gas to increase bulb life and minimize bulb replacement over life of the lamp
- Tough, impact resistant polycarbonate housing and cover resists breakage and provides safe environment for bulbs and electrical connections
- Robust, two stud mounting keeps lamp in it’s original mounting position when subjected to the harshest shock and vibration forces, eliminating the need for re-aim
Vibration dampening grommet provides vibration barrier between plow frame and bulb filaments reducing threat of bulb failure
|
|
|
|
Removable Headgear, Lights & Plow as one unit:
Returns your truck to its original factory appearance after plowing. Eliminates over 100 pounds of weight off the front suspension and tires……Less wear!!
Easier & faster to attach, detach, and store as one unit
Drive in Attachments:
Truck attachment is ramped so plow can easily slides into position.
Easy drive-in alignment. MM2 receiver brackets have 4-1/2” wide opening.
Self Adjusting Jack-Stand:
Self adjusting vertical jack-stand guarantees proper height alignment of the mount regardless of vehicle height, suspension package, and snow/ice build-up.
Other Features Include:
- Faster and safer to attach and detach than competitive mounting systems.
- Built-in handle disengages both pins simultaneously when removing the plow.
Simplicity of Minute Mount 2 over competition - 100% mechanical with no electrical switches or wiring to fail.
|
|
|
|
The Homesteader™ complies with Federal Standards and vehicle manufacturer weight ratings
- Exclusive scrape lock feature hydraulically locks the blade down for clean scraping action
- Available in 6’ 8” & 7’4” lengths
- 21” Height with ¼” polyethylene moldboard
• Full blade trip, ¼” x 5” steel cutting Edge
- 250# & 280# (Complete Plow Package)
The receiver brackets on the vehicle are removable by simply pulling the pins for optimum ground clearance when plow is not in use |
|
|
|
Available in 6’9” or 7’6” with the Minute Mount® 2 system. #14 gauge steel moldboard, 26” tall.
- Ideal for non-commercial, personal use, designed specifically for compact and light 1/2 ton 4x4's.
- A 1” thick UHMW polymer cutting edge helps absorb plowing shock while also reducing weight.
LD Series Specifications & Accessories
|
6’9” |
7’6” |
Cutting Edge |
1” Polymer
T.P. – Std. |
1” Polymer
T.P. – Std. |
Rubber Deflector |
N.A. |
Optional |
Steel Deflector |
N.A. |
N.A. |
SnoFoil® |
N.A. |
Optional |
Cast Shoes |
Optional |
Optional |
Plow Guides |
Standard |
Standard |
|
|
|
|
|
|
