| | Dejana's DuraBox 472 was developed specifically for inner city utility & municipal use to provide a safer work environment, more efficient use of space and easier access to the work area. The interior cargo space has been custom designed to provide more efficient use of storage space, and offers a variety of compartments to accomodate specific items such as meters, gas fittings, electric wiring, etc... In addition, the ergonomic layout provides a convenient work area that is more secure and free from inclement weather.
Most important for inner city use is the interior access to all compartments and interior storage for all tools. Not only does the interior compartment space provide a convenient work area, it also means that operators and technicians do not have to step into traffic or avoid exterior obstacles to access their tools. A convenient interior ladder rack means that even ladders are stored inside!  
| | 
|
| | Body Specifications - 13' Durabox body .100” white aluminum bonded side panels with FRP skirts on both sides.
- 94" outside with rubber fenderettes.
- 85" interior height.
- Forward peak with full width drop down interior door
- 20" opening on r.s. for ladder storage
- Aluminum interior bins installed left and right side. A 20" wide space between the bulkhead and the driver side bins for a computer kiosk.
- All bins 18" deep.
- All shelves have rubber matting. (9) dividers per shelf.
- All pull out draws have heavy roller bearing slide-outs, 150 lbs. per slider.
- Laminated hardwood floor with aluminum treadplate on aisle.
- 14" deep grip strut bumper and fold down step, full opening of door.
- 20" double rear doors with glass with interior latches on both doors, top and bottom.
- Flip down door in rear body panels streetside at floor level with drip moulding over door 12" x 12" clear opening for access to compressor hose reel.
- Jack hammer holder compartment on curbside rear with durable steel bottom plate, 30" wide a 40" high and 20" deep.
- Automatic latching jackhammer holders.
- Two(2) 6” x 6” tool bit holders.
| | |
| | Compressor - Boss 8060-ubi underdeck compressor. Cooler mounted in front of radiator. 125 CFM air on demand.
- Hannay 12V hose reel with four way roller mounted on left rear.
- One additional air outlet in front under bumper facing forward
- 75' 3/4" air hose with quick coupler
- Tool oiler mount on wall above reel
- 1/4" turn shut off valve
- OSHA check valve
- Ball stop
- Water seperator
| | |
Lighting & Electric - LED body lighting with two rear stop/turn lights mounted in rear body panels to be seen thru rear door glass with rear doors open.
- Two(2) amber turn arrow lights mounted midway of body on left and right side.
- Four(4) amber flashing 4" strobes two recessed in front peak each side (facing forward) and two in rear body panels to be seen thru rear glass.
- Two(2) Hella work lights on rear of body at roof line.
- 12v DC to 120v AC inverter - quasi sine wave mounted on streetside on top shelf next to work bench with mesh cover.
- Continuous output: 3,000 watts / up to 25.0 amps. - (2)12v batteries mounted on streetside below bin shelf.
- Battery boxes w/covers vented to the outside
- Magnatek 120v AC/12v DC 50 amp power supply.
- Distribution panel with 20 amp, 110v breakers mounted on streetside over the work bench.
- Shore power outlet with cover curbside in recessed panel outlets.
- 120v AC male receptacle in weatherproof box.
- 12v DC outlets over work bench on driver’s side.
- 120v AC male receptacle in weatherproof box mount on rear body panels in recessed panel (left and right sides).
- Pintle hook receiver with safety chain rings.
- Six wire trailer lights connector.
- Receiver hitch tube welded to chassis frame.
- Ramsey QM 9000 winch with four way roller.
- Adapter for rear receiver mounting.
- Rosco monitor/backup camera for safety when backing up.
More information about this product is available in our literature library!
|
